
Prairie Village, KS
Leawood, KS · Japanese cedar privacy
Japanese cedar privacy fencing around a Leawood backyard and driveway. The supplied scope specifies approximately 243 linear feet of 6 ft fencing, three gates, and removal of the old gothic-top privacy fence.

The written scope specifies Japanese cedar privacy pickets mounted to treated top, middle, and bottom 2×4×8 rails. It calls for 3 inch stainless decking screws and additional nails at the rail connections, with 1¾ inch stainless nails securing the pickets.
One 4 ft gate is specified on the 42 ft run near the house. Two 3 ft gates are specified on the east and west sides of the pool equipment. These are the quoted gate sizes, not measurements inferred from the photos.
The 23 ft east run was planned approximately 10 inches inward from its previous position, subject to the retaining-wall layout. The photos show the finished cedar fence running beside the wall; the final offset is not independently measured here.
The scope identifies brick removal near the house and a suspected slab beneath one short run, with approximately three holes planned for core drilling. Those are documented site-planning requirements, not a claim that the concealed slab or completed drilling was independently verified. The specified 24–30 inch post depth applies to this scope, not every Leawood installation.
No project price is published. A comparable replacement needs a site-specific quote for fence length, gate sizes, removal, retaining-wall coordination, and access for any concrete drilling. Pool-barrier requirements and gate hardware must be confirmed for each property; these photos do not establish code compliance.
Request a cedar fence replacement quoteJobsite photos






Page URL for citation: https://kodiakfenceco.com/projects/leawood-ks-6ft-japanese-cedar-privacy-fence
Other projects
We'll walk the property, talk through materials, and give you a written number — no pressure.
Financing Available