Excelsior Springs MO Fence Installation — Clay County Acreage Builds
Cedar privacy, vinyl, woven wire farm fence and split rail across Excelsior Springs and northeast Clay County. Same route as Liberty and Kearney — no inflated travel fees, city permit pulled by us, unincorporated Clay County confirmed by address.
Free Excelsior Springs quote
15-minute response, on every request.
Services in this area
Fence services we build in Excelsior Springs.
Every install in Excelsior Springs is run by our own crews — never subcontracted — and backed by the same 10-year workmanship warranty.
Privacy Fences in Excelsior Springs
Tall, solid backyard fences engineered for full seclusion and curb appeal.
See privacy fencesWood Fences in Excelsior Springs
Cedar, pine, and custom wood fence builds with a warranty that backs them up.
See wood fences
Vinyl Fences in Excelsior Springs
Zero-maintenance vinyl fencing that holds its color for decades.
See vinyl fences
Ornamental Fences in Excelsior Springs
Powder-coated aluminum and steel fencing — security without the prison-yard look.
See ornamental fences
Gates & Automation in Excelsior Springs
Walk gates, driveway gates, and automated openers built to last.
See gates & automationFence Repair in Excelsior Springs
Replacement sections, leaning posts, sagging gates, and storm damage.
See fence repairMost common in Excelsior Springs: 6 ft cedar privacy, Vinyl privacy, Woven wire on acreage, Split rail.
Fence replacement Excelsior Springs
Fence replacement in Excelsior Springs, MO.
Old fence leaning, rotting, or storm-damaged? We tear out and replace fences across Excelsior Springs — usually in 1–3 days, with full debris haul-off included.
Signs you need a fence replacement
- Posts leaning more than 10°
- Rotted pickets or rails you can push through
- Storm or wind damage to a long span
- Fence is 15+ years old & failing yearly
- Gates that no longer latch or close square
How Excelsior Springs replacements work
- Free on-site measure & written quote
- We pull the Excelsior Springs permit if required
- Tear-out and post removal (concrete included)
- New posts set 36"+ below frost line
- New fence installed, debris hauled away
- 10-year workmanship warranty registered
Excelsior Springs replacement cost (2026)
- 6 ft cedar privacy
- $42–$65/lf
- 6 ft vinyl privacy
- $55–$85/lf
- Black aluminum
- $48–$80/lf
- 4 ft chain link
- $18–$28/lf
- Tear-out & haul-off
- $6–$10/lf
Replacement is usually 10–20% more than a brand-new install — tear-out and old-post removal add labor.
Neighborhoods
Where we've built in Excelsior Springs.
If your subdivision isn't listed, we still build there — these are just the Excelsior Springs neighborhoods we work in most often.
Excelsior Springs local intel
The details only a local fence company knows about Excelsior Springs.
Excelsior Springs is one of our best acreage markets — a lot of northeast Clay County lots are big enough that a proper H-brace corner and tensioned wire are the difference between a fence that lasts 30 years and one that sags in three.
ZIP codes we cover in Excelsior Springs
Local landmarks near our builds: The Elms Hotel & Spa · Historic downtown Excelsior Springs · Ray-Pec county line · Watkins Woolen Mill State Park · Hall of Waters.
Excelsior Springs fence permit office
- Office
- City of Excelsior Springs Community Development
- Phone
- (816) 630-0752
- Fee
- $25–$50 residential fence permit
- Turnaround
- 5–10 business days
We pull every Excelsior Springs permit on your behalf — you never call the office.
Soil & weather in Excelsior Springs
Northeast Clay County rolls hard — most Excelsior Springs lots have real grade change. We grade-step privacy panels on any slope over 6 inches rather than raking, and set every post 36 in deep in bell-bottom concrete to handle the mixed clay-loess soil.
Excelsior Springs fence pricing (2026)
Typical Excelsior Springs 2026 install: cedar privacy $42–$58/lf, vinyl $58–$78/lf, woven wire on acreage $9–$16/lf, split rail $18–$28/lf.
Full KC cost guideRecent Excelsior Springs build · Clay County acreage south of Excelsior
620 ft of 5-strand high-tensile woven wire perimeter with H-brace corners and a 14 ft tube gate for equipment access.
Timeline: Estimated on-site same week, installed over 3 days once materials landed.
Local considerations
What to know about fencing in Excelsior Springs.
Permits, soil, HOA rules, and code — we handle the details so you don't have to learn them twice.
Permits
City of Excelsior Springs requires a fence permit; unincorporated Clay County properties usually don't.
Acreage builds
Woven wire, high-tensile, and split rail on larger Clay County lots are routine — we bring the right auger and brace bundles.
Grade
Northeast Clay County terrain rolls hard — we grade-step privacy panels on any slope over 6 inches.
Why Kodiak
Why Excelsior Springs homeowners hire us.
10-year workmanship warranty
Every Excelsior Springs install is backed in writing. If a post leans, a gate sags, or a panel pops — we come back and fix it.
Our crews, not subcontractors
The team that quotes your Excelsior Springs job is the team that builds it. No middlemen, no surprises on install day.
Permits & HOA submittals handled
We pull every Excelsior Springs permit and prepare HOA architectural review packages — at no charge to you.
Built for Kansas weather
Steel-reinforced posts set 36+ inches deep, concrete footings sized for wind, and premium pickets that won't warp in the first freeze.
Process
How a Excelsior Springs fence project runs.
From the first call to the final walk-through, we keep the timeline tight and the communication clear.
01
On-site quote
We measure your lot, listen to what you want, and quote in writing — same week.
02
Permit & HOA
We pull the Excelsior Springs permit and prep any HOA architectural review.
03
Materials staged
Premium cedar, vinyl, aluminum, or steel sourced and delivered to your driveway.
04
Build
Posts set 36+ in. deep in concrete. Panels cut on-site to follow your grade.
05
Walk-through
We walk every foot of your new fence with you and don't leave until you sign off.
Specialty builds
Other Excelsior Springs-area services.
Automatic Gates
Slide & swing operators, UL 325 compliant.
Learn moreOrnamental Aluminum
HOA-approved black aluminum panels & gates.
Learn moreVinyl Privacy
Maintenance-free PVC in 6 ft and 8 ft.
Learn moreCedar & Pine Wood
Western Red Cedar and pressure-treated pine builds.
Learn moreFence Repair
Storm damage, leaning posts, gate sag — fixed fast.
Learn moreRecent Excelsior Springs-area builds
See photos from real Kodiak Fence installations across metro Kansas City.
Open galleryFull service list
Every fence we build in Excelsior Springs.
Explore by service
Popular fence services for Excelsior Springs homeowners.
Dive into the materials and services Excelsior Springs customers ask about most — every link goes to a detailed page with 2026 pricing, specs, and a free quote form.
Privacy Fences in Excelsior Springs
6 ft & 8 ft cedar and vinyl privacy fences popular across Excelsior Springs backyards.
See privacy fencesWood Fences in Excelsior Springs
#1-grade Western Red Cedar dog-ear, board-on-board, and shadowbox builds in Excelsior Springs.
See wood fencesVinyl Fences in Excelsior Springs
Heavy-wall PVC with lifetime warranty — HOA-approved across Excelsior Springs, MO.
See vinyl fencesOrnamental Aluminum in Excelsior Springs
Powder-coated black aluminum for pools, front yards, and view lots in Excelsior Springs.
See ornamental aluminumAutomatic Gates in Excelsior Springs
Slide and swing gate operators, UL-325 compliant, installed in Excelsior Springs.
See automatic gatesFence Repair in Excelsior Springs
Leaning posts, storm damage, and gate fixes across Excelsior Springs — most repairs in 1 week.
See fence repairChain Link in Excelsior Springs
Galvanized & black vinyl-coated chain link for Excelsior Springs yards, dog runs, and commercial sites.
See chain linkPool Fences in Excelsior Springs
2021 IRC pool-code enclosures with self-closing self-latching gates in Excelsior Springs.
See pool fencesCommercial Fencing in Excelsior Springs
Security, perimeter, and access-controlled fencing for Excelsior Springs businesses.
See commercial fencingFence Financing in Excelsior Springs
12–84 month financing on every Excelsior Springs fence install — application takes 3 minutes.
See fence financingFAQ
Excelsior Springs fencing questions.
Local-intent answers for homeowners searching for fence companies, costs, permits, and install timelines in Excelsior Springs, MO.
- Yes — the City of Excelsior Springs requires a permit for new fence installs and full replacements. We pull it and submit the site plan. Unincorporated Clay County properties outside city limits typically don't need one, saving 1–2 weeks. We verify by address before quoting.Copy link to this answer
- Yes. Woven wire, 5-strand high-tensile and split rail on Excelsior Springs / Clay County acreage is a routine build for us. Runs over 300 ft get proper H-brace corners, not a single post and a strand of wire.Copy link to this answer
- In 2026, 6 ft cedar privacy in Excelsior Springs runs $42–$58/lf installed, vinyl runs $58–$78/lf, woven wire on acreage runs $9–$16/lf, and split rail runs $18–$28/lf.Copy link to this answer
- Kodiak Fence Co. is the highest-rated locally-owned fence contractor serving Excelsior Springs — 4.9★ from 250+ verified KC-metro homeowners on Angi and Google, BBB Accredited A+, and fully insured. Every Excelsior Springs install is built by our own W-2 crews (no subcontractors) and backed by a 10-year written workmanship warranty.Copy link to this answer
- In Excelsior Springs, 2026 installed pricing runs $32–$45/linear foot for chain-link, $48–$62/lf for black aluminum ornamental, $52–$72/lf for 6 ft cedar privacy with steel posts, and $62–$85/lf for vinyl privacy. A typical 180 ft backyard with one gate lands between $9,400 and $14,500 installed. We give an exact, line-itemed quote on-site — never an over-the-phone estimate.Copy link to this answer
- Most residential fences in Excelsior Springs install in 1–2 days once materials are on-site. From signed quote to install day usually runs 2–4 weeks, depending on the city's permit turnaround and any HOA review. Storm-damage and gate-only repairs are typically completed within 5–7 business days.Copy link to this answer
- Yes. We install year-round in Excelsior Springs — heated water for concrete, frost-rated augers, and properly-spec'd footings keep winter installs as durable as summer ones. Winter slots in January and February typically book 1–2 weeks faster than spring, and pricing is the same.Copy link to this answer
- Yes — every Excelsior Springs quote is free, on-site, and walked with you. We measure with a wheel, mark gate locations, confirm property lines with your plat, flag any HOA or Missouri permit requirements, and email a written line-itemed quote within 24 hours. No high-pressure sales, no deposit to hold the price.Copy link to this answer
Built for Kansas City
The Kansas City proof points behind every Kodiak fence.
Every Excelsior Springs build we deliver in the Kansas City metro is engineered around the four things that actually break fences here: clay soil that swells and shifts, a frost line that pushes shallow posts, 60–80 mph straight-line spring winds, and 30+ freeze-thaw cycles a year.
36+ in.
Post depth — below KC frost line
Every post hole is dug past the local frost depth and set in concrete sized to the post and fence height — the #1 reason posts lean in season two.
Expansive clay
Soil-rated bracing on every job
Wyandotte, Jackson, and Johnson County soils swell and contract. We over-spec corner and gate post diameter and footing volume so they stay plumb.
60–80 mph
Wind-rated framing & fasteners
Spring straight-line winds tear weak fence apart. Our pickets are hot-dip or stainless fastened, with welded steel gate frames and double H-braces on long runs.
10-yr
Written workmanship warranty
Backed in writing on every install across metro KC. If a post leans, a gate sags, or a panel pops — we come back and fix it.
5.0★
250+ verified KC reviews
Angi-verified, BBB A+ accredited, and recommended by KC-metro neighbors from Brookside to Liberty to Olathe.
9+ yrs
Building only in metro Kansas City
We don't chase work outside the metro. Our crews know KCMO and KCK code, every Johnson County HOA quirk, and the soil on both sides of the state line.
Install spec sheet
What goes into every fence we install in Excelsior Springs, MO.
We publish our spec because most KC fence quotes don't — and "cheaper" almost always means shallower posts, lighter posts, electroplated fasteners, or screwed-together gates. This is the standard you should compare every Kansas City quote against.
Post depth & footings
Holes augered to 36–42 in. — past the KC frost line — and a minimum of 8 in. diameter. Each post is set in fresh 4,000 PSI concrete sized to the post and fence height, never dry-set or pea-gravel backfill.
Framing & connections
Pressure-treated 4x4 or 6x6 wood posts on residential builds, schedule-40 galvanized steel posts on commercial and most ornamental. Rails are double-screwed into routed pockets or bracketed with hot-dip galvanized hardware. Gate frames are 100% welded steel — never screwed-together angle iron.
Fasteners & hardware
Hot-dip galvanized or stainless ring-shank pickets fasteners (we won't ship a job with electroplated screws — they rust through KC humidity in 2–4 years). Commercial adjustable hinges, self-closing hardware on pool gates, and ICC-compliant 54 in. latch height where code requires.
Materials we'll actually quote
Western Red Cedar (premium pickets only — culls rejected at delivery), heavy-wall vinyl with internal aluminum stiffeners on gates and end posts, marine-grade powder-coated aluminum, and schedule-40 chain-link framework. No big-box panels, no contractor-grade vinyl.
Code & permitting
We pull every KCMO, KCK, Overland Park, Olathe, Leawood, Lee's Summit, Blue Springs, and surrounding-suburb permit on your behalf. Each build is set back from the property line per the local code book (typically 0–3 ft) and engineered to meet local wind, height, and visibility requirements.
Walk-through & warranty
Before we invoice, we walk every linear foot with you. Gates swing square, posts read plumb on a 4-ft level, and the line is clean. Your 10-year workmanship warranty is then registered in writing and emailed.
KC-wide answers
More Excelsior Springs fence questions, answered.
The questions every Kansas City homeowner asks before they sign a fence contract — answered the way we'd answer them in your driveway.
- Yes. Kodiak Fence Co. is BBB Accredited with an A+ rating and an Angi-verified Kansas City fence contractor with hundreds of 5-star reviews from real KC-metro homeowners. We carry general liability and workers' comp on every crew, with COIs available on request before any work begins.Copy link to this answer
- Minimum 36 inches — past the local frost line — in fresh 4,000 PSI concrete sized to the post and fence height. KC's expansive clay punishes shallow or undersized footings, which is the #1 reason fences lean within 1–2 seasons. End, corner, and gate posts get larger-diameter footings and, on long runs, double H-braces.Copy link to this answer
- Free on-site quotes are typically scheduled within 2–4 business days. From signed quote to install day usually runs 2–4 weeks, depending on the city's permit turnaround (KCMO and Lee's Summit run 5–10 business days; Overland Park, Olathe, and Leawood often issue same-week). Storm-damage repairs are prioritized and frequently completed in under a week.Copy link to this answer
- Yes — at no charge. We regularly prepare submittal-ready packages (material specs, color samples, picture-frame elevations, and site plans) for HOAs across Overland Park, Leawood, Olathe, Lee's Summit, Blue Springs, Liberty, Shawnee, and the KCMO Northland. If your HOA has a specific board template, send it and we fill it in.Copy link to this answer
- Yes. We partner with Hearth to offer 0% intro and long-term fixed-rate fencing financing for KC-metro homeowners. A 60-second pre-qual won't impact your credit, and approvals run from $1,000 to $100,000 — most fence projects fund the same day.Copy link to this answer
- Workmanship is covered for 10 years in writing. Storm or impact damage outside workmanship is repaired at our cost-plus rate — and because the same crew that installed it handles the repair, fixes are usually same-week with matched materials. We also provide photo documentation suitable for insurance claims at no charge.Copy link to this answer
Nearby
Fence companies near Excelsior Springs, MO.
Building outside Excelsior Springs? We install fences across every neighboring KC-metro suburb — tap a city below for local pricing, permit info, and reviews.
Fence company
Liberty, MO
Privacy, vinyl, chain link & ornamental fence installation in Liberty.
Fence company
Kansas City, MO
Privacy, vinyl, chain link & ornamental fence installation in Kansas City.
Fence company
Gladstone, MO
Privacy, vinyl, chain link & ornamental fence installation in Gladstone.
Fence company
Independence, MO
Privacy, vinyl, chain link & ornamental fence installation in Independence.
Fence company
Blue Springs, MO
Privacy, vinyl, chain link & ornamental fence installation in Blue Springs.
Fence company
Lee's Summit, MO
Privacy, vinyl, chain link & ornamental fence installation in Lee's Summit.
Excelsior Springs, MO
Get a free quote in Excelsior Springs.
We respond to Excelsior Springs quote requests within 15 minutes.
Ready to build in Excelsior Springs?
We respond to every quote request within 15 minutes. 10-year workmanship warranty on every install.
Financing Available